“Spray paint VS wood wax”—- Why did the home I received have these treatments?
“Wood is wood, after all, and has many natural fiber holes. These holes, they breathe, they absorb water. If there’s water stains on the wood, you drink it. That’s why the wood gets damp! Damp wood is capricious, deforming and cracking… Have you ever seen a wooden bathroom door with mushrooms:)? So what to do? Why don’t you just plug the hole? Nothing wrong with… Many manufacturers of solid wood furniture will spray paint, and the paint will seal the fiber holes in the surface and protect the whole furniture. It not only improves the appearance level, but also avoids the deformation of the furniture. And good paint taste scattered very fast, pollution is very little, sealing is also very good.
Some of the more advanced solid wood furniture stores, in addition to the use of nitrocellube paint, will also be very exquisite use of imported wood wax coating surface! This is very environmentally friendly and easy to use, especially for furniture such as children’s beds, wood wax is a safer choice. But wood wax oil is not the fiber hole that closes wood completely, BE about to TROUBLE A bit on late period maintenance so.
1. Do not put sharp, hard and sharp things on solid wood furniture (board furniture is the same) scratched on the broken .
2. Furniture in a dry position, do not touch water, do not put a pot of green plants on the solid wood table and then spray water on the leaves… Damp will make logs mildew and discoloration.
3. Avoid excessively high or low indoor temperature, which may aggravate wood cracking.
4. Avoid sun exposure, which can also lead to cracking.
5. if used in the heater, air conditioning outlet, cracking +1 (you do not want to be air conditioning to blow, it does not want to.)
6. Do not use wet towel to wipe, especially on the furniture of wood wax oil, after fiber hole absorbed water and dried again, furniture surface can become rough, time is long out of shape crack. (Only human skin likes facial mask hydration)
Clean：
1. For dust treatment, use a soft dry cotton cloth or feather duster to gently wipe the surface
If a big feather duster isn’t elegant enough… You can also buy ostrich feather dusters
2. The tonal materials, oil stains, red wine and water stains of cooking in daily life should be cleaned with dry cloth in time. If not treated for a long time, it will lead to wood staining and discoloration. (Don’t forget it has lots of “pores”)
Maintenance entry-level maintenance：
1. If the surface is not rough and scratched, use clean soft cotton cloth, stick wood wax and wipe the furniture surface evenly along the wood grain. Residual in the surface of the excess wood wax, take another piece of clean soft cotton cloth, along the wood grain to clean up the line, and then go out to play 5-6 hours, come back to dry after is a hero.
2. Ordinary maintenance time is once in spring and autumn. The use of dry environment, or the use of floor heating room in winter in the case of large temperature difference between day and night, to increase a furniture maintenance in winter.
Advanced luxury SPA maintenance: (senior!)
1. Encountering stubborn scale, scratch, depression, staining, etc. As a first step, according to the specific situation to choose 240 or 600 sandpaper, along the grain in the damaged area of slight grinding, polishing with a clean soft cloth after removal of wood ash, another take a piece of soft cloth glued take wood oil along the wood to wood oil grinding area is wiped, another take a piece of clean soft cloth put extra wood oil along the grain.
In the second step, wait 12 hours for the wax to dry completely and repeat the previous wax operation with 1000 # sandpaper.
The third step, 12 hours after the wood wax is completely dry, observe the elimination of traces, such as the surface gloss is consistent with other parts, you can use wood wax by ordinary maintenance treatment, that is, to complete the repair. If the surface gloss or scratches are not eliminated, please repeat the second step.
2. Use wet cotton cloth to wipe the surface of furniture, resulting in rough surface texture, please use the second and third steps of professional maintenance to deal with.
